The Manufacturing Division of Chalmers & Kubeck in Aston, Pa is a full-service manufacturing facility
with small and large capacity CNC machines. Milling capacity up to 13 feet x 30 feet. Vertical boring mill capacity up to 32 feet with 10 feet under the rail. Chalmers & Kubeck's comprehensive range of close tolerance machining ensure finished products that meet the most demanding specifications of CNC manufacturing and repair companies near Philadelphia.
Overview
- NEW FOR 2005 Kitamura Machining Center with 5 Axis and Palletizer
- Computer modeling and virtual machining with Unigraphics. AutoCAD and CADCAM Capabilities
- Lathes with turning capacity up to 32" dia. x 17' between centers.
- CNC Vertical Boring Mills with capacity up to 32' in. dia. x 10' under rail.
- CNC Horizontal Mills with the capacity for machining up to 13' x 30' long.
- Small machining capabilities including CNC Machining Centers.
Kitamura - Mycenter HX630i |
||
 |
Kitamura Mycenter HX 360 i has been customized with a 5 Axis Rotary Table, a Laser Tool Probe, and a Renishaw Part and Inspection Probe. | |
| Table Size 630 x 630mm (24.8" x 24.8") | Tool Storage Capacity 50 pcs. | |
| Travel (X,Y,Z) 1000 x 800 x 820 mm (39.4" x 31.5" x 32.3") |
Tool Change Time (T-T/C-C) 1.5sec/5.5 sec | |
| Spindle taper NT No. 50 | Rapid feed (X x Y x Z) 50m/min (1,969ipm) | |
| Spindle Speed 35-12,000 min-1 | Power Requirement 55KVA | |
Romer 3000i Series |
||
 |
The 12 foot portable 3000i arm is well suited for tight-tolerance inspection, measuring and reverse engineering work in the aerospace, automotive, off-road, agricultural equipment and similar industries. | |
Machining Capabilities |
||
| Type | Qty | Maximum Capacity |
| Horizontal Boring Mills | 8 | Table Size: 59 " wide by 79" long, with head travel of 72" high, 5" diameter spindle |
| CNC Horizontal Boring Mill (4-Axis) | 1 | Table Size: 98" square, rotary, 154" travel with head travel of 115" high |
| Mill (4-Axis) | 1 | Table Size: 87" x 71", rotary, 138" travel with head travel of 98" high |
| CNC Floor Type Horizontal (5-Axis) Boring Mill | 1 | Horizontal travel of 30 feet Head travel of 98" Rotary table 80" x 98" |
| CNC Floor Type Horizontal | 1 | Horizontal travel of 30 feet (5-Axis) Boring Mill Head travel of 156" Rotary table 144" squire |
CNC Manufacturing is only available at the Aston, Pa facility.
Locations / Contacts (Aston, PA):
| Name | Phone | |
|
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
610-494-4300 |
|
|
This e-mail address is being protected from spambots. You need JavaScript enabled to view it |
610-357-6977 |